Congratulations on the purchase of the Athletic Performance. The package includes: Blast Motion Sensor, Wearable Clip Attachment, Blast Charging pad, Micro-USB cable for charging pad, and the Get Started guide.
Take the sensor out of the package. Once you have connected the charger to a USB port, place the sensor on the charger. The charger’s color LED lights will indicate the status of the sensor. It takes 60 minutes to fully charge the sensor. The sensor battery can last for seven days in standby mode, but battery life will differ based on usage.
LED colors: 1. Red LED – The charger is not active (the sensor is not on the charger or the sensor is fully charged). 2. Blue LED – The sensor is charging. 3. Green LED – The sensor is completely charged. The green light will change to red LED after a while since charging sequence has stopped.
If the sensor is fully charged it doesn’t reset the charging sequence. The light will show redon the charger when placing the sensor back on the charging pad.
2. Download the Athletic Performance app from the App Store and install it on your device. 3. Start the app and sign in as a new user. If you are an existing user, enter your email password to access your account.
Please save your email address and password for your records.
A sensor can only be registered and paired to one email account. The same sensor can be used on multiple devices provided you sign in with the original email and password used to register the sensor originally.
Wake the sensor to pair it with your device.
Point the Blast Logo towards the ground for two seconds.
Point the Blast Logo towards the sky for two seconds.
Repeat steps 1 and 2 until the sensor connects.
Place the sensor into the attachment clip with the Blast Motion icon straight up and down, Blast man head at the top of the clip.
Place the attachment clip to your waistband. For best results make sure the attachment clip is placed in the middle of your back.
The app provides the opportunity to setup different clips. The quick start is the default clip, building a clip is required for setup. To setup a new Clip go to Setting > Clip > Add New Clip. Next, walk through the process of adding the Brand, Clip and Nickname.
6. Start your actions and the Athletic Performance will starts tracking immediately.